Saturday, October 12, 2019
Nitrite is a corrosion inhibitor present in heavy-duty antifreeze, primarily used for
the prevention of cavitation wet sleeve liner pitting.
Cavitation is a type
of corrosion that occurs in heavy-duty
engines when bubbles continuously form and burst
on the "wet" side of a wet sleeve liner. Without proper inhibitors, typically nitrite and/or molybdate, to form a protective barrier, wet sleeve liners in heavy-duty applications are unprotected and can
develop catastrophic
damage!
Read More...
|
|
Monday, July 1, 2019
Using good quality water in your vehicle's cooling system
is essential for the antifreeze/coolant to be able to do its
job: transfer heat and prevent corrosion. While it may be
easier in the short term, using poor quality water will cost
you time and money in the long term, as it can cause
multiple issues within the system including scale buildup,
inhibitor "drop-out," and corrosion.
Read More...
|
|
Friday, June 7, 2019
Cincinnati, OH June 7, 2019– KOST
USA, Inc. has been awarded a Top Workplaces 2019 honor by The Cincinnati
Enquirer. The award is based solely on
employee feedback gathered through a third-party survey administered by
research partner Energage, LLC.
Read More...
|
|
Thursday, May 2, 2019
Cincinnati, OH May 2, 2019– KOST USA, Inc. has partnered with The Osborne Logistics Group for their warehousing and
transportation needs.
Read More...
|
|
Tuesday, April 23, 2019
A question that come sup frequently is what’s the difference between light and heavy duty antifreeze? KOST USA is here to help answer that. question.
Read More...
|
|
Friday, April 5, 2019
The
coolant and radiator systems in most SUV’s, trucks, and cars in America are
quite simplistic in their function and design.
Read More...
|
|
Thursday, January 31, 2019
A more serious fault that you may experience during the winter season is a frozen
car engine. An anti-freeze/coolant is of essence as it prevents the engine from
freezing in the cold.
Read More...
|
|
Tuesday, January 22, 2019
Organic Acid Technology is the state-of-the-art technology used as factory fill in most original equipment manufacturers (OEMs), including light and heavy duty makes. This technology may cost more for the initial fill, but maintenance costs are dramatically reduced. Also, this technology is best for protecting the aluminum of modern engines. OAT technology uses organic acid inhibitors such as sebacic acid, benzoic acid, and 2-ethyl hexanoic acid (2-EH)to protect metals in the cooling system from corrosion.
Read More...
|
|
Thursday, November 29, 2018
Diesel
exhaust fluid or DEF is a product capable of saving our health, the environment
and our valuable dollars.
Read More...
|
|
Thursday, September 20, 2018
Learn why winterization of outdoor equipment is essential, as failure to winterize can cause expensive damage.
Read More...
|
|