The KOSTKut Sol 10 is a water miscible soluble oil concentrate that forms milky, stable emulsions when mixed with water. Its natural mild lubricity and rust prevention formulation make it useful as a general purpose emulsion metalworking fluid. KOSTKut Sol 10has been engineered without DEA, nitrite, nitrate, phenol and chlorine components to provide a more environmental compliant product. It may be utilized on a wide variety of general machining and grinding operations. It is suitable to use KOSTKut Sol 10for forged and cast ferrous metals, many stainless steels, as well as many non-ferrous grades. It will not stain most extruded and cast aluminum grades under normal operating conditions.

To ensure proper fluid life, fluid filtration with filters and/or centrifuges, a good source low to no mineral content clean water and simple control of pH and emulsion concentration should be incorporated.

Recommended Uses

15:1 - 20:1 General Machining
20:1 - 30:1 Centerless, ID, OD, Surface Grinding
20:1 – 30:1 Mild Lubricant in water hydraulic system

Refractometer Chart

Benefits

TYPICAL PROPERTIES	KOSTKut Sol 10
Appearance	Dark Brown, Amber Liquid
Specific Gravity @ 60°F	0.912
Density (lbs/gal)	7.61
pH, Neat	9.2
pH, 5%	9.0
Viscosity @ 40°C, cSt	33.5
Product Number:	5320